 |
| POLYON AL™ |
|
• Polyurethane elastomer
tread chemically bonded to a light-weight aluminum core.
• Aluminum
core has a strong attractive appearance, is lightweight and is resistant to
rust and corrosion.
• Colors: Available in non-marking red & green
tread for 2” face and blue in the 1-1/4 tread.
• Durometer: 95
Shore A (+/-5).
• Temperature range: -40° F to 180° F.
 |
|
| POLYFLEXON™ |
|
• Uniquely formulated
“Flex Compound” polyurethane is chemically and mechanically bonded to
a precision aluminum core, preventing tread separation and assuring reliable
mobility.
• Combination of the round PolyFlexon® tread and sealed
precision ball bearings minimizes surface friction, enables wheel to turn
easily and requires less effort to startup and maintain a rolling
load.
• PolyFlexon® wheel offers a semi-cushioned ride, is
non-marking and is capable of rolling over small debris (metal shavings, door
& floor joints, etc.)
• Great for manually pushed carts &
equipment.
• Durometer: 85 Shore A (+/-5).
• Temperature
range: -40° F to 180° F.
|
|
| POLYFLEXON CAST™ |
|
• Uniquely formulated
“Flex Compound” polyurethane is chemically bonded to heavy cast iron
core.
• Combination of Rounded Polyflexon tread and sealed precision
ball bearings minimizes surface friction, enables wheel to turn easily and
requires less effort to start-up and maintain a rolling load.
•
Polyflexon wheel offers a semi-cushioned ride, is non-marking and is capable of
rolling over small debris (metal shavings, door & floor joints, etc.)
• Great for manually pushed carts & equipment.
•
Durometer: 95 Shore A (+/-5).
• Temperature range: -40° F to
180° F.
|
|
| POLYON™ |
|
• Polyurethane elastomer
tread chemically bonded to cast iron core.
• Offers higher weight
capacities while providing good floor protection and quiet rolling operation.
• Optional precision ball bearings and tapered roller bearings require
less effort to start up and maintain a rolling load; they also generate less
friction heat which may prolong the life of the wheel.
• Works well in
both indoor and outdoor environments; however cast iron core can rust; if this
is an issue look at using aluminum or plastic core wheels.
•
Durometer: 95 Shore A (+/-5).
• Temperature range: -40° F to
180° F.
|
|
| ENERGY SAVER POLYON™ |
|
• Crowned polyurethane
elastomer tread chemically bonded to a solid heavy-duty cast iron core.
• Combination of crowned tread and heavy core, offers higher weight
capacities, durability and greater mobility than standard Polyon™ wheels.
• Optional precision ball bearings and tapered roller bearings require
less effort to start up and maintain a rolling load; they also generate less
friction heat which may prolong the life of the wheel.
• Provides good
floor protection and quiet rolling operation.
• Color: Dark blue on
black
• Durometer: 95 Shore A (+/-5).
• Temperature range:
-40° F to 180° F.
|
|
| Pallet Jack Wheels |
|
• Pallet
jack wheels are made to withstand heavy loads and rigorous ongoing use.
• Polyurethane elastomer tread chemically bonded to heavy duty iron
core.
• Non-marking black tread on black.
• Equiped with 6204
Sealed precision ball bearings. 20mm I.D.
• Durometer: 65 Shore D
(+/-5)
• Temeprature range: -40° to 180° F
|
|
| ULTRA POLY™ |
|
• 3/4” Thick ultra
strong polyurethane elastomer tread chemically bonded to a solid heavy-duty
cast iron core.
• Combination of thick tread and heavy core, offers
higher weight capacities and provides greater durability than other mold on
polyurethane tread wheels.
• Optional precision ball bearings and
tapered roller bearings offer higher weight capacities and require less effort
to start up and maintain a rolling load.
• Provides excellent floor
protection and quiet rolling operation.
• Color: Green on black.
• Durometer: 50 Shore D (+/-5).
• Temperature range: -40°
F to 180° F.
|
|
| CHAMPION™ |
|
• 1-3/16” Thick
ultra-flex compound polyurethane elastomer tread chemically bonded to a mag
style aluminum core, sets a new standard in high quality wheels; maximizing
load capacity, shock load, and vibration stabilization.
• Combination
of the thick ultra-flex tread and oversized sealed precision ball bearings
minimizes rolling resistance.
• Elastic properties of ultra-flex tread
provide excellent abrasion resistance and a cushioned ride that easily rolls
over debris and small obstructions (metal shavings, electrical cords, floor
joints, etc), offers maximum floor protection, high impact strength and ultra
quiet rolling operation.
• Great for both manual or a power assisted
applications.
• Color: Green
• Durometer: 75 Shore A (+/-5).
• Temperature range: -40° F to 180° F.
|
|
| STEROLLIZER™ |
|
• The SteROLLizer®
wheel’s tread is an exclusively engineered rubber made for high
temperature and autoclave applications.
• Offers a cushioned, quiet
ride and excellent floor protection.
• Core material offered in both;
rust resistant stainless steel for corrosive, washdown and clean environments
and aluminum cores for bakeries.
• High-temp sealed precision ball
bearings available; for increased mobility.
• Exceptional resistance
to water, oil, grease, and most acids, chemicals and cleaning solutions.
• Color: Burnt Reddish Orange
• Durometer: 75 Shore A (+/-5).
• Temperature range: -40° F to 400° F continuous, 425° F
intermittent.
|
|
| POLYON MAXROK™ |
|
• Polyurethane elastomer
tread chemically bonded to a ultra-strong mag style glass filled nylon core
that has the same weight capacity of steel; light-weight yet very durable
• Offers a smooth effortless ride, is non-marking and protects floors.
• Resists compression set or “flat spotting”, has
exceptional impact strength and good abrasion resistance.
• Colors:
Red & green.
• Durometer: 95 Shore A (+/-5).
•
Temperature range: -45° F to 180° F.
|
|
| POLY-PRO™ |
|
|
• Non-marking
polyurethane tread mechanically locked to Polyolefin core.
• Durable,
light-weight wheel with good weight capacity; offers floor protection and quiet
rolling operation.
• Variety of designs, colors and bearing options
available.
• Economical
• Durometer: 55 Shore D (+/-5).
• Temperature range: -40° F to 180° F.
|
|
| POLYMADIC™ Premium Polyurethane |
|
• High performance UV
resistant, liquid cast polyurethane elastomer; mechanically locked onto an
injection molded polyolefin core; takes more abuse and has a longer service
life than standard PP wheels.
•1-1/4" wide wheels are Maroon on gray,
with sanitary style (no thread guards) dished out core and dual row annular
ball bearings, offering improved mobility and stability- axle can be completely
tightened without binding the bearings. 2 inch wide wheels have a dark gray
tread on a gray core.
• Optional No Seam style available (for
upcharge): No seam on the wheel tread reduces the possibility of leaving
indentions on soft floors (wood, linoleum, etc). Change wheel designation to
"PS"
• Durometer: 55 Shore D (+/-5).
• Temperature range:
-45° F to 180° F.
|
|
| ERGOLASTOMER™ |
|
• Super strength solid
cast polyurethane elastomer one piece design with mechanically locked glass
filled nylon bearing collar, offers the best durability and performance of any
elastomer type wheel on the market.
• Precision and tapered bearings
for towline use.
• 100% washable, steam cleanable, chemical resistant.
• Extreme impact strength and abrasion and compression resistance,
will not flat spot when used within capacity rating.
• Offers a smooth
ergonomic ride; easy start up.
• Bearing collar disperses heat away
from elastomer wheel.
• Color: Gray with black core / bearing
collar.
• Durometer: 68 Shore D (+/-5).
• Temperature range:
-50° F to 180° F.
|
|
| DURATHANE™ |
|
|
• Solid cast
polyurethane elastomer one piece design eliminates bonding failures and is a
very reliable and durable wheel.
• 100% washable & steam
cleanable; not effected by grease, oils, most chemicals & cleaning
solutions, brine & blood.
• Offers a smooth effortless ride, is
non-marking and protects floors.
• Resists compression set or
“flat spotting”, has exceptional impact strength and is highly
abrasion resistant.
• Color: Blue
• Durometer: 60 Shore D
(+/-5).
• Temperature range: -50° F to 180° F.
|
|
|
